how to change a intex pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

Introduction

Owning an Intex pool is a great way to cool off during the hot summer months. One thing that pool owners should be familiar with is how to change the pool filter. Changing the pool filter is an important part of pool maintenance, and knowing how to do it properly can save you a lot of time and money in the long run.

In this article, we will discuss the steps involved in changing an Intex pool filter. We will start with an overview of the different types of Intex pool filters and then move on to the step-by-step process of changing the filter.

Different Types of Intex Pool Filters

There are two types of Intex pool filters, cartridge filters and sand filters. Cartridge filters are the most common type of Intex pool filter and are relatively easy to change. Sand filters, on the other hand, require a bit more work, but are more effective at removing dirt and debris from the pool water.

Step-by-Step Guide to Changing an Intex Pool Filter

1. Turn off the pool pump

Before beginning, it is important to make sure that the pool pump is turned off. This will prevent any accidents from occurring while changing the filter.

2. Remove the old filter cartridge

For cartridge filters, the first step is to remove the old filter cartridge. To do this, first, turn off the pool pump. Next, open the filter compartment by removing the filter cover. Once the cover is removed, take out the old filter cartridge and discard it.

3. Clean the filter compartment

After removing the old filter cartridge, take the time to clean the inside of the filter compartment. Use a soft brush to remove any debris or dirt that may have accumulated.

4. Install the new filter cartridge

Once you have cleaned the inside of the filter compartment, it is time to install the new filter cartridge. Place the new filter cartridge into the filter compartment, making sure that it is securely in place.

5. Reassemble the filter cover

With the new filter cartridge in place, reassemble the filter cover. Make sure that the cover is securely in place before turning on the pool pump.

6. Turn on the pool pump

Finally, it is time to turn on the pool pump. Once the pump is turned on, check the filter pressure gauge to ensure that the new filter cartridge is working properly.

Conclusion

Changing an Intex pool filter is an important part of pool maintenance. With the steps outlined in this article, pool owners should have no problem changing their pool filter. By keeping your pool filter clean and in working order, you can enjoy your pool all summer long.