how to backwash sta-rite pool filter

Author: Poolking - Swimming Pool Equipment Manufacturer

How to Backwash Sta-Rite Pool Filter

If you own a pool, you need to maintain it regularly to keep it in top condition. One of the essential maintenance tasks is to clean your pool filter. A clean pool filter ensures that your pool water is free of debris and contaminants, providing you with crystal clear water for swimming. One of the best filters available for your pool is the Sta-Rite Pool Filter. It is a durable and reliable filter that is easy to clean. In this article, we will show you how to backwash a Sta-Rite Pool Filter, step-by-step.

Why is Backwashing Important?

The pool filter traps dirt, debris, and other contaminants. Over time, the filter media gets clogged with these impurities, restricting the water flow through the filter. Backwashing is a procedure that flushes out the accumulated dirt and debris from the filter, restoring the filter's efficiency. Backwashing helps your pool filter to last longer, saves you money on pool maintenance, and provides you with better quality pool water.

Step-by-Step Guide to Backwashing Sta-Rite Pool Filter

Here's how to backwash a Sta-Rite Pool Filter:

1. Turn Off the Pump

Before you start backwashing your Sta-Rite Pool Filter, you should turn off the pump that circulates your pool water. It is essential to avoid damaging the pool pump.

2. Turn the Multiport Valve

Find the multiport valve, which is usually located on the top of the Sta-Rite Pool Filter. The multiport valve controls the flow of water through the filter. Turn the valve to the backwash position. This will shift the water flow from the normal filter mode to the backwash mode.

3. Turn on the Pump

Once the multiport valve is set to the backwash position, you should turn on the pump. The pump will start pushing the water through the filter in the opposite direction, flushing out all the debris and contaminants out of the Sta-Rite Pool Filter.

4. Monitor the Pressure Gauge

While backwashing your pool filter, you should keep an eye on the pressure gauge. The pressure gauge indicates the pressure inside the filter. When you start backwashing, you will notice a gradual increase in the pressure. The pressure should reach a maximum point, and then it will start decreasing again. Wait until the pressure drops to its normal operating range, and then turn off the pump.

5. Rinse the Filter

After backwashing, you need to rinse the Sta-Rite Pool Filter. Turn the multiport valve to the rinse position and turn on the pump. This will flush out any remaining debris or contaminants from the filter. Allow the rinse cycle to run for a few minutes and then turn off the pump.

Final Thoughts

Now that you know how to backwash your Sta-Rite Pool Filter, you can ensure your pool remains clean, clear, and usable all year round. Don't forget to clean the filter basket regularly to prevent debris from getting into your pool filter. Regular maintenance, including backwashing the Sta-Rite Pool Filter, will help you enjoy your pool without any worries.