How to Backwash Your Hayward Sand Pool Filter: A Complete Guide
If you have a Hayward sand pool filter, you know how important it is to keep it clean and properly maintained. One of the most important tasks for maintaining your pool filter is to backwash it regularly. In this article, we will show you how to properly backwash your Hayward sand pool filter.
What is Backwashing?
Backwashing is the process of cleaning your pool filter by reversing the flow of water through it, which flushes out the accumulated dirt and debris. When the pressure gauge on your filter reaches 8-10 PSI above the starting pressure, it's time to backwash.
How to Backwash a Hayward Sand Pool Filter?
The following steps will guide you on how to backwash your Hayward sand pool filter with ease:
Step 1: Turn off the pump
Locate your pool pump and turn it off. This will prevent any water from flowing into the filter during the backwashing process.
Step 2: Turn Valve to Backwash
Locate the valve handle on your Hayward sand pool filter, usually located on the top or side. Turn the valve handle 90 degrees clockwise to the "Backwash" position.
Step 3: Turn on the pump
Turn on the pool pump and let it run for 2-3 minutes, or until the water in the sight glass is clear.
Step 4: Rinse
Turn the valve 90 degrees clockwise to the "Rinse" position and let the pump run for another 30-60 seconds. This will help remove any remaining debris before returning the filter to its normal setting.
Step 5: Turn the Valve to Filter
Finally, turn the valve handle 90 degrees clockwise to the "Filter" position. Your Hayward sand pool filter is now fully backwashed and ready to keep your pool water clean and clear.
Tips for Maintaining your Hayward Sand Pool Filter
Maintaining your pool filter is essential to keeping your pool water clean and clear. Here are a few tips to help you keep your Hayward sand pool filter running smoothly:
- Backwash your filter once a week during peak season and once every two to three weeks otherwise.
- Change your filter sand every five years.
- Keep an eye on the pressure gauge and backwash your filter when the pressure is 8-10 PSI above the starting pressure.
- Keep the pool pump basket and skimmer basket clean to help prevent debris from entering your pool filter.
- Use a filter cleaner at least once a season to help remove any buildup that may not be removed during backwashing.
Now that you know how to properly backwash your Hayward sand pool filter, you can rest assured knowing that your pool water will be clean and clear all summer long. Remember to regularly maintain your pool filter and keep an eye on the pressure gauge to ensure that it continues to operate effectively. With these tips in mind, you can enjoy your pool without worry..