How Much Diatomaceous Earth Should You Use in Your Hayward Pool Filter?
Your pool is a place of relaxation and entertainment during the hot summer months. To keep it clean and safe for swimming, you need to use a pool filter. If you have a Hayward pool filter, you know the importance of diatomaceous earth (DE) for proper filtration. But just how much diatomaceous earth should you use in your Hayward pool filter?
What is Diatomaceous Earth?
Diatomaceous earth is a natural substance made from the fossilized remains of diatoms, which are tiny aquatic organisms with hard shells. The diatom shells are crushed into a fine powder, which is then used as a filter media in pool filters. DE is highly porous and has a high surface area, making it an excellent filter media.
Why Use Diatomaceous Earth in Your Pool Filter?
DE is the most effective filter media for removing small particles and impurities from your pool water. Unlike sand or cartridge filters, DE filters can remove particles as small as 5 microns. It also helps to remove algae, bacteria, and other harmful contaminants from your pool water. Using DE in your pool filter can help you maintain a clean and healthy swimming pool.
Determining the Amount of Diatomaceous Earth to Use
The amount of diatomaceous earth you should use in your Hayward pool filter depends on the size of your filter and the manufacturer's recommendation. Hayward pool filters come in various sizes, ranging from 24 square feet to 72 square feet. The manufacturer's recommendation for the amount of DE to use is usually listed on the filter tank or in the owner's manual.
Here are some general guidelines for determining the amount of DE to use based on your Hayward pool filter's size:
- For a 24-square-foot filter, use 3 pounds of DE.
- For a 36-square-foot filter, use 4.5 pounds of DE.
- For a 48-square-foot filter, use 6 pounds of DE.
- For a 60-square-foot filter, use 7.5 pounds of DE.
- For a 72-square-foot filter, use 9 pounds of DE.
It's important to note that these are general guidelines, and you should always consult your filter's owner's manual for the manufacturer's recommendation.
How to Add Diatomaceous Earth to Your Pool Filter
Adding DE to your Hayward pool filter is a simple process that can be done in a few minutes. Here's how to do it:
1. Turn off the pump and filter system.
2. Remove the filter tank's lid and drain any water left in the tank.
3. Add the recommended amount of DE into the filter tank through the skimmer or filter opening.
4. After adding the DE, rinse off any excess from the filter tank's top and sides.
5. Reinstall the filter tank's lid and turn on the pump and filter system.
Using diatomaceous earth in your Hayward pool filter is essential for maintaining clean and safe pool water. The amount of DE to use depends on the size of your filter and the manufacturer's recommendation. Always consult your owner's manual for the recommended amount of DE. Adding DE to your pool filter is a simple process that can be done in a few minutes. By following these guidelines, you can keep your pool water clean and healthy for swimming..