Poolking, your best swimming pool equipment manufacturer and supplier with more than 20 years experience.                                                                              +8613922334815

Language

Diagnosing and fixing common swimming pool pump problems

2023/02/18

Author: Poolking - Swimming Pool Equipment Manufacturer

Swimming pool pumps are an essential component in keeping your pool water clean and clear. Without them, the water in your pool can become stagnant, filled with debris and even develop algae. A malfunctioning swimming pool pump can lead to a lot of frustration and potentially costly repairs.

In this article, we will discuss some of the most common swimming pool pump problems and how to diagnose and fix them. 1. Pump is not turning on: If your swimming pool pump isn't turning on, the first thing to check is the power supply.

Make sure that the circuit breaker hasn't tripped and that the GFCI (Ground Fault Circuit Interrupter) hasn't been triggered. If the power supply is fine, the next thing to check is the motor. If the motor is making a humming noise, but not turning on, it could be a sign that the capacitor has failed.

A professional electrician can easily replace this component. 2. Low pressure: If you notice that the pressure in your swimming pool is lower than usual, it could be a sign that your pump is not working efficiently.

The first thing to check is the skimmer basket and pool pump basket. If either of these baskets are clogged with debris, it can restrict water flow and lower the pump pressure. If the baskets are clean, check the impeller.

The impeller is a small, fan-like component that moves the water through the pump. If the impeller is clogged, it can also cause low pressure. 3.

Pump is making a loud noise: If you notice that your swimming pool pump is making a loud noise, it could be a sign that the bearings are worn out. Bearings are responsible for supporting the rotating shaft and keeping it aligned. Over time, bearings can become worn out and make a loud, grinding noise.

A professional pool technician can easily replace the bearings and get your pump running smoothly again. 4. Leaking water: If you notice that water is leaking from your swimming pool pump, it could be a sign of a damaged seal.

Seals are responsible for preventing water from leaking out of the pump. If the seal is damaged or worn out, it can allow water to escape. A professional pool technician can replace the seal and prevent further water damage.

Pump is running too hot: If your swimming pool pump is running too hot, it could be a sign of a motor overload. Motor overload can occur if the pump is working too hard, or if the voltage supply is too low.

If the pump is working too hard, it could be due to clogged or dirty filters. Cleaning or replacing the filters can alleviate the workload on the pump and prevent motor overload. In conclusion, swimming pool pump problems are common, but they can be easily diagnosed and fixed with a little knowledge and the right tools.

If you notice any of the above problems with your swimming pool pump, it's best to contact a professional pool technician to diagnose and fix the problem. A well-maintained swimming pool pump will ensure that your pool is clean and clear all season long.



CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat
Now

Send your inquiry

Choose a different language
English
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
العربية
Deutsch
Español
français
italiano
Current language:English