Brief Introduction of Swimming Pool Hair Filter

Product introduction: The shell and inner tank of the quick-opening hair collector are made of stainless steel. Working principle: There is a stainless steel filter screen inside the equipment, and the raw water is filtered through the internal metal filter screen to block debris in the screen, and the purified water flows out. There is a sewage outlet at the bottom of the container, which can remove sediment, hair, fibers and other sundries, and the filter can be removed from the inside for cleaning.

Scope of application: The hair collector is the necessary equipment for the circulating water treatment system. The turbid water in the swimming pool is mixed with a large amount of sediment, stones, sundries, hair, etc., which are pumped out, and first intercepted and collected by the hair collector. The effect of its filtration and throttling not only threatens the life of the water pump, but also has a great impact on the quality of the filtered water of the water purifier. The hair filter is an essential pretreatment device in the swimming pool circulating water treatment, which mainly removes fibers, hair and larger solid impurities in the pool. Product features: 1. The main body is made of stainless steel 304, and the stainless steel filter basket is high-strength and corrosion-resistant.

2. The top quick-opening structure is quick to open and easy to clean. 3. The water inlet and outlet are at the same height, and the national standard flange interface is convenient for installation. 4. Set the venting device at the bottom.

5. Standard filter screen aperture ΦΦ3mm, aperture 5mm. 6. Special specifications can be customized. General principles for hair collector selection: 1. Inlet and outlet diameter: In principle, the inlet and outlet diameter of the filter should not be smaller than the inlet diameter of the matching pump, which is generally consistent with the inlet pipe diameter.

2. Nominal pressure: Determine the pressure rating of the filter according to the highest possible pressure in the filter pipeline. 3. The selection of the number of holes: The main consideration is the particle size of the impurity to be intercepted, which is determined according to the process requirements of the medium. For the particle size that can be intercepted by wire mesh of various specifications, please refer to the table "Filters Specifications" below.

Poolking is the best swimming pool equipment manufacturer and supplier in China. Poolking exists to provide the highest quality swimming pool equipment while offering competitive pricing..